LaserMax’s rail mounted laser sight quickly and securely attaches to any Picatinny or Weaver style rail, allowing for multi-use between pistol and long gun platforms. It is truly evolutionary because it incorporates its own integral Picatinny rail mount, allowing for additional accessories to be stacked onto the unit.
Features:
-Available in Red or Green Laser.
-Integral Picatinny rail system to accomodate a wide variety of accessories.
-Ambidextrous activation to accomodate the left or right-handed shooter.
-Constructed from FRN (Fiber Reinforced Nylon) for lasting durability.
-Maintains alignment after every battery change.
-Light weight (the same weight as one .40 S&W round).
-Extra alignment tool (provided) stores inside battery compartment for use on the range or in the field.
Specifications:
| Description |
LaserMax UNI Red |
LaserMax UNI Green |
| |
|
|
| Model |
LMS-UNI |
LMS-UNI-G |
| Mounts |
M1913 - Picatinny |
M1913 - Picatinny |
| Laser Wavelengh |
635nm Red |
532nm Green |
| Laser Power |
< 5mw |
< 5mw |
| Beam Characteristic |
Pulsed 11Hz or
Contant on modes |
Pulsed 11Hz
mode only |
| Spot Size |
0.31" @ 7 Yds
0.75" @ 25 Yds
|
0.31" @ 7 Yds
0.75" @ 25 Yds |
Accuracy
POA/ POI |
Adjustable - Holds
alignment +/- 0.5" |
Adjustable - Holds
alignment +/- 0.5" |
| Accessory Remote Switch |
6 & 10" remote switches |
6 & 10" remote switches |
| Battery Type |
Std. 352 (2) |
Std. 1/3N (2) |
| Battery Life |
3 hrs constant on |
1 hr (pulsed) |
| Dimensions |
1.40W x 2.27L x
0.76H |
1.40W x 2.27L x
0.76H |
| Weight |
0.80 oz. |
1.0 oz. |
| Warranty |
3 Years |
3 Years |
Constructed from durable FRN (Fiberglass Reinforced Nylon), the new laser system features a rapid and secure mounting mechanism that is consistent with firearms safety guidelines. The user can safely install the system without ever passing their hands in front of the muzzle. No special tools are required. The system is adaptable for two methods of activation which address various operating conditions. The first method is an ambidextrous switch that can safely and easily turn the unit on by pressing in with the index finger. The second method of activation (recommended for long gun use) is an optional remote switch for momentary on/off.
Small enough for discreet use on compact pistols, the Uni-Max™ is also rugged enough to be used interchangeably on any Picatinny rail platform, including those on rifles, shotguns, sub-machine guns and machine guns. The low profile housing puts the laser as close to the barrel as possible for maximum accuracy. The system is easily user-alignable for windage and elevation and will maintain its zero through repeated rapid fire and every battery change. Storage for the alignment tool is conveniently built into the inside of the battery compartment.
Beretta CX4 Storm Overview
Once again, Beretta
teamed with internationally renowned Giugiaro Design to study the ergonomics
and style the firearm. Rounded forms are snag-free, modern and innovative. Rubber
stock comb provides a comfortable rest for the cheek. Magazine is inside the
grip, protected from impact and the environment. Beretta CX4 Storm controls
are very similar to those found on our popular 92FS pistols, so most shooters
will be immediately familiar with the operation of this firearm. Length of pull
can be lengthened in .6" increments, from 13¼" to 15" by adding
one to three stock spacers (one provided). Multiple sling attachment points
allow a multitude of carry options. Retractable forward accessory rail extends
out from the fore-end, allowing quick mounting of tactical light or laser unit
on the Beretta CX4 Storm. Hard mounting points allow the addition of various
accessories, including side, top and bottom "Picatinny" rails. These
will accept optics, tactical lights. lasers and vertical grips. Finally, on
the Beretta CX4 Storm one side rail included, the front post sight is adjustable
for windage and elevation, while the rear ghost ring sight has long and short-range
apertures, both sights are protected by rugged "ears" and may be folded
down when optics are used.
Designed to meet
the needs of law enforcement, the new Beretta CX4 Storm is also excellent for
sport and home defense. The fixed barrel design and long sight radius (12.9")
make this gun inherently accurate. The cold hammer forged 16.6" barrel
is chrome lined for maximum corrosion resistance and increased barrel life.
The 5¾ 1b. weight and overall length of 29.7" make the Beretta CX4 carbine
is a light and compact. semi-automatic blowback design, and is simple, rugged
and reliable. Field stripping can be done simply and quickly without any tools.
High strength techno polymers were used to reduce the weight in the Beretta
CX4, increase corrosion resistance, eliminate problems associated with metal
finish wear, and achieve an affordable price. Cross-bolt safety, magazine button
and bolt-handle are easily reversible for right or left-hand use. Even the ejection
for the Beretta CX4 can be switched from right to left and back without the
need of tools or additional components. Firing pin and hammer block prevents
movement of these critical components until the trigger is pulled on the Beretta
CX4, and a bolt safety will not allow the bolt to cycle should the carbine be
dropped or struck against an object.
Beretta's Cx4 Storm
redefines the pistol-caliber carbine, with racy and radical lines from the masters
of industrial design at Giugiaro. Form follows function in a symphony of smooth,
sweeping curves made possible by the use of modern high-strength techno polymers.
Beretta's use of cutting-edge materials also keeps weight down to just 53/4
lbs., making the Beretta Cx4 a pleasure to carry, whether in the field or on
duty. Five different models accept full-size Beretta magazines from the 92/96
and Cougar series pistols in 9mm, .40 S&W and .45 Auto, including large-capacity
restricted and pre-ban styles. The cold hammer-forged 16.6-inch barrel is chrome-lined
for long life and corrosion resistance with any ammo.
|